TRFA03-GC | Gas Caddy / Fuel Tank Transfer Pump

Nozzle

• Redesigned nozzle to include ergonomic grib and power button for added convenience.

Cable Clips Power

• Only use a 20V or lower Marine or Car Battery to avoid causing damage to the pump

Auto Stop Sensor

• Auto-Stop System to prevent fuel loss or accidental spills
• Our Built-In Sensor will automatically stop without the need to press the off button preventing any Overflow

Compatibility

• Designed to be compatible with Scepter Gas Caddies / Fuel Tanks

Hands-Free Experience

• Built-in locking clip secures nozzle on receiving receptacles for a hands free experience

Gas Can Adapters

• Includes a 1PK of Gas Caddy Adapters built-into pump head
• Compatible with Scepter Cag Caddies
• **Does NOT include Gas Caddy

Incompatible

• Drinking water, thinners, solvents, hot liquids, acetone, benzene, creosol, phenol, methyl ethyl, concentrated caustic liquid soda, nitric acid, hydrochloric acid, sulfuric acid etc.

What's Included

• Transfer Pump, 1PK of Gas Caddy Adapters & Manual

1. Insert the suction pipe into the tank
2. Fasten the pump's joint nut tightly
3. Connect power suply
4. Attach the auto-stop nozzle to the receiving tank using the clip, make sure the discharge nozzle is in a vertical position
5. Turn switch on to start flow
6. Pump will automatically stop and buzzer will sound when the liquid reaches the stop line
7. Turn switch off to stop flow
8. Disconnect power supply
9. Let the left-over liquid in the hose flow back into the tank
10. Becareful to not damage the auto-stop nozzle's sensor during usable and storage

1. Do not run dry
2. Wear proper personal protective equipment
3. Never operate pump near fire or source of spark
4. Do not turn the pump upside down after use
5. Operate only in open, cool, and well-ventilated areas
6. Do not over tighten any part

Backed by a 1-Year Manufacturers Warranty